53
-
Under the
Selected VCR
drop down box is the
Used For
section, where you are able to select either to have the VCR to be
used for
Record VCR-OUT
,
Record Mon B
, or
playback
. Please note that when selecting either
Record VCR-OUT
or
Record Mon B,
only one of these options are available at one time.
Record VCR-OUT
allows you to record all the cameras
present on the multiplexer, whereas
Record Mon B
records just those cameras present on Mon B.
-
Recording Speed
is also selectable for Time-lapse recording and Alarm Event recording. Therefore, when an action/alarm
event is triggered, the VCR can be set to record at a faster rate to capture more snapshots of video. There is also a box that
you will need to check if you want to have the VEXT enabled.
-
The
Teletext Format
allows you to configure various Record and Playback methods. Refer to the LTC 2600 user interface
for a list of currently available Record and Playback formats.
■
Output Relays:
The multiplexer has three internal
relays, two for use with either actions/alarms and the
other for the use with a video loss. From this subtab,
you are able to
enable
or
disable
the relay by clicking
in the appropriate check box. Also in the
Action/Alarm
Relay Polarity
drop down box, you have the option of
either having the relay
Normally Open
or
Normally
Closed
for whatever condition is needed. For the
Action/Alarm relays, you can also choose how the
internal relay is to be triggered. This can be triggered
by
action detection
,
an alarm
,
both
, or by having the
relay
not activated
by choosing
Off
.
-
For
Videoloss,
you can select to have the relay
enabled by checking the
Videoloss Output Enabled
box. Also, like the Action/Alarm relays, you can
choose the video loss relay to be either
Normally
Open
or
Normally Closed
. The default for the
relays is
Normally Closed
.
■
System4
Access:
This subtab is where you can set up
how much access is permitted by other users on your
multiplexer. Starting in the upper left hand corner of
this subtab, select which number multiplexer you are
setting up. You have up to a total of 30 multiplexers
that can be set up. By clicking on the
MUX Password
button you are able to create a new password or change
your existing password.
-
The
Log Settings
are where you enable what logs
can be printed out by the lower user level operators
of the multiplexer. You can choose which logs are
available for operators to print out. The level is
determined by which level the user is logged in
while using the GUI application.
-
The
Enable Configuration Upload/Download
Reminder
box is a toggle which determines whether
or not you would like to have the reminder box
pop up when you go on-line as a reminder to
download the configuration tables. The default is to
be enabled.
LTC 2650 S
YSTEM
4 M
ULTIPLEXER
GUI
C
ONFIGURATION
Output Relays Table
System4
Access Table
