18
Additional Servers can be added in the future if multiple Allegiant
®
,
System4
, or WorldView transmitters are connected to your
system. As other servers are added, their corresponding seedbars will be available for icon seeding.
When multiple servers of the same type are in your system, the seedbar will contain a list of server document names. Newly seeded
icons will be connected to the selected document in the list.
Multiple Server Seedbar
2.5.3
Seeding Icons
To place icons representing actual security devices into a map page of the site configuration file:
■
Click and drag the representative icon from the seedbar into the map page (installer only).
Device icons can then be arranged within the map page to reflect actual physical positioning of the field devices in a surveillance site.
Icons representing standard cameras, camera with a pan/tilt, and AutoDome
®
cameras are available for installers to seed into the
system map pages. Note that icons available on the seedbar vary depending on server purchased. These icons can later be
customized with the use of an icon editor program (not included), allowing the user to match the icons to their system's exact
configuration. Icons representing all physical devices installed in a system should be seeded into the map, regardless of whether or
not the devices (for example, an auxiliary alarm) are currently enabled.
NOTE
:
To learn more about setting up icon properties, see the
Configuring Your
System4
Multiplexer System
section of this user
manual.
2.5.4
Window Options
Within the map page area, there are various methods to manipulate map window configurations. Multiple map windows may be
displayed and placed in different patterns within the map area.
Methods for automatically arranging the
Site Configuration
windows are included as options from within the
Window
menu.
Available options include
Cascade
,
Tile Horizontally
, and
Tile Vertically
. Following are example illustrations for these
configurations.
LTC 2650 S
YSTEM
4 M
ULTIPLEXER
GUI
GUI M
AP
A
PPLICATION