16
2.5.2
Adding Server Devices to a Map Page
To place icons from the appropriate server application into the map page:
■
From the
Server Menu,
select the applicable server
application title. If configuring a new page, only the Server
applications will be available in this menu. The list of
available servers displayed in this menu depends on the
Philips modules installed on your system. If re-configuring
an existing page, the configuration file titles will also be
available for the applications previously seeded. See
Server
Menu
(upper two menu items are servers, lower two menu
items are existing configuration files). For some servers,
when you select the applicable server application title, a new
Configuration File dialog box will appear.
■
Enter the name for the new configuration file. The file will
be used to store the applicable server's configuration data.
Existing configuration files can be opened by selecting them
from the file list. The subdirectory used to store the
configuration files will depend upon the server and the
directory chosen during installation. The file extension for
the configuration file depends upon the server.
■
A dialog box will appear similar to the following two
illustrations (depending on the server configuration type).
Choose the appropriate system model, and for the
WorldView
®
system, insert the unit serial number. Note
that for initial system configuration, ONLY the serial
number can be left to all zeros. Only on the first
initialization, the system will read the unit serial number
from the installed firmware.
WorldView System Type Dialog Selection Box
LTC 2650 S
YSTEM
4 M
ULTIPLEXER
GUI
GUI M
AP
A
PPLICATION
Server Menu
System4
New Configuration Dialog Box