EN 87
English
T
roubleshooting
Picture
No picture
Check the video connections. See chapter “Connect”.
Turn on the TV to the Video In channel.
Use the TV remote control to select the channel until you see
the DVD screen. See chapter “Get Started”.
Check that the video cable (HDMI, CVBS or SCART)
connecting the recorder to the TV is not damaged.
•
•
•
•
The picture is distorted or
black and white during
playback.
The disc does not match with the TV colour system standard
(PAL/NTSC).
The disc is dirty, clean the disc.
At times, some picture distortion may occur. This is not a
malfunction.
If you have connected the recorder to a HDMI TV:
- Check if your TV supports the selected HDMI video
resolution. Select a lower HDMI video resolution. (See chapter
“Adjust settings - Setup HDMI video and audio”).
- Change to a better quality HDMI cable (e.g. Category 2 cable).
•
•
•
•
There is picture or sound
interference with the TV
reception.
Check the connection to the antenna or cable TV signal.
Fine-tune your TV channel. Read chapter “Adjust Settings”.
•
•
Unable to display JPEG
pictures.
This unit only supports pictures in JPEG-Exif
fi
le format with a
resolution not exceeding 4096 x 4096 (horizontal/vertical).
JPEG pictures that are downloaded from the internet or have
been modi
fi
ed using the computer may not be displayed
properly.
•
Sound
No sound.
Check the audio connections. See chapter “Connect”.
Depending on the audio device you have connected to the
recorder, set the digital output accordingly. See chapter “Adjust
Settings - Audio settings”.
•
•
The connected ampli
fi
er
produces distorted sound
Do not connect any cables from the recorder to the ‘Phono’
input of your ampli
fi
er.
If you are playing a DTS CD, connect the Hi-Fi system or
ampli
fi
er to the COAXIAL socket of this recorder.
•
•
hdr3800_31_eng_29522.indd 87
hdr3800_31_eng_29522.indd 87
2008-07-18 11:46:20 AM
2008-07-18 11:46:20 AM
