74 EN
Set digital output
Select a suitable setting if you have connected
an audio/video device to the COAXIAL socket
on the recorder.
1
Press
HOME
.
2
Select
[ Settings ]
, then press
OK
.
3
Select
[ Audio ]
>
[ Digital Output ]
, then
press
X
.
4
Select an option and press
OK
.
[ PCM
]
Select this if the connected device cannot
decode multi-channel audio. The recorder
converts Dolby Digital and MPEG-2 multi-
channel signals to PCM (Pulse Code
Modulation).
[ All
]
Select this if the connected device
supports multi-channel audio format. The
audio output is played according to the
audio stream on the disc.
5
To exit the setup menu
,
press the
Blue
button
[ Exit ]
.
Set HDMI audio
See the chapter ‘Adjust Settings – Adjust HDMI
video and audio’.
Enable night mode
Night mode optimises playback of sound at low
volumes
1
Press
HOME
.
2
Select
[ Settings ]
, then press
OK
.
3
Select
[ Audio ]
>
[ Night Mode ]
, then
press
X
.
4
Select an option and press
OK
.
[ On
]
Enable night mode. High volume outputs
are softened and low volume outputs are
increased to an audible level.
[ Off
]
Disable night mode. Enjoy surround sound
with its full dynamic range.
5
To exit the setup menu
,
press the
Blue
button
[ Exit ]
.
hdr3800_31_eng_29522.indd 74
hdr3800_31_eng_29522.indd 74
2008-07-18 11:46:18 AM
2008-07-18 11:46:18 AM
