EN 53
3139 785 32804
5.
Firmware Upgrading & Diagnostic Software
Nucleus Name
DS_SYS_DisplayFatalOff
Nucleus Number
1224
Description
Turn off the display-fatal functionality which displays debug-information on the
display when encountering a fatal error condition from which could not be
recovered automatically
Technical
-
Issue the command to stop using the display-fatal functionality to the
analogue board
Execution Time
Less than 1 second.
User Input
None
Error
Number
Description
122400
Turning off the display-fatal functionality succeeded
122401
Turning off the display-fatal functionality failed
122402
The returned errorcode from the analogue board is unknown:
122403
No DS errCode known for analogue board error:
122404
There was no response from the analogue board.
122405
Section validation or write failed in NVRAM
122406
Reading the section from NVRAM failed
122407
Initialisation of IIC or reaching NVRAM failed
Example
DS:> 1224
122400:
Test OK @
Nucleus Name
DS_SYS_DisplayFatalGet
Nucleus Number
1225
Description
Get the display-fatal flag of the recorder
Technical
-
Issue the command to get the status of the display-fatal functionality to the
analogue board
Execution Time
Less than 1 second.
User Input
None
Error
Number
Description
122500
Getting the display-fatal flag succeeded
122501
Getting the display-fatal flag failed
122502
The returned errorcode from the analogue board is unknown:
122503
No DS errCode known for analogue board error:
122504
There was no response from the analogue board.
122505
Reading the
display fatal
flag failed
122506
Initialisation of IIC or reaching NVRAM failed
122507
Unexpected version read from NVRAM section
122508
Reading the fatal flag from NVRAM failed
Example
DS:> 1225
122500: The Display Fatal functionality is ON
Test OK @
Nucleus Name
DS_SYS_SettingsSet
Nucleus Number
1226
Description
Programs the digital board settings into the boot EEPROM on the digital board.
Technical
-
Evaluate user input.
-
Set-up IIC-bus.
-
Write data to boot EEPROM.
-
Update checksum.
Execution Time
1 second
User Input
A large hexadecimal value that represents the digital board hardware
information string
Error
Number
Description
122600
The settings were successfully programmed.
122601
User input is invalid.
122602
IIC access failed.
Example
DS:>1226 44424849716040014C45434F2B0000006020070000010200000101008
008000044564452323030312E30303102020000000103000000020100000000000
00000
122600:
Test OK @
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网,免费下载各种维修资料