EN 12
3139 785 32804
4.
Mechanical Instructions
4.6 Dismantling of HDMI Board
1) Remove 2 screws to loosen the HDMI Board 1006 and
HDMI Shield 190 form the Rear Plate 230. The mounting
screws are shown in figure 10.
Figure 4-10: Remove mounting screws for HDMI Board
2) Remove the HDMI Shield 190 for HDMI Board Service
Position. The HDMI Board Service Position is shown in
figure 11.
Figure 4-11: HDMI Board Service Position.
Insulation
Sheet
4.7 Dismantling of the Digital Board
1) Remove the HDMI Board first, and remove the HDMI
Bracket 131 by unscrewing one screw.
2) Then remove 4 screws to loosen the Digital Board 1003
as shown in Figure 12.
Figure 4-12: Remove mounting screws for Digital Board
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网,免费下载各种维修资料