EN 51
3139 785 32804
5.
Firmware Upgrading & Diagnostic Software
Nucleus Name
DS_SYS_SlashVersionSet
Nucleus Number
1217
Description
Set the slash version of the system
Technical
-
Decode the user input for the slash version to set
-
Issue the command to set the slash version to the analogue board
Execution Time
Less than 1 second.
User Input
The slash version
Error
Number
Description
121700
Setting the slash version succeeded
121701
Invalid slash version, no slash version is set.
121702
Setting the slash version on the Analogue Board fails.
121703
Invalid input.
121704
The returned error code from the analogue board is unknown:
121705
No DS error code known for analogue board error:
121706
There was no response from the analogue board.
121707
Retrieving the current version failed
121708
Unknown recorder layout type
121709
Validating the section where the version is stored failed
121710
Getting the configuration section from NVRAM failed
121711
Initialisation of IIC or reaching NVRAM failed
Example
DS:> 1217 82
121700:
Test OK @
Nucleus Name
DS_SYS_SlashVersionGet
Nucleus Number
1218
Description
Get the slash version of the system
Technical
-
Issue the command to get the slash version to the analogue board
-
Return the received information to the user
Execution Time
Less than 1 second.
User Input
None
Error
Number
Description
121800
Getting the slash version succeeded
121801
Getting the slash version failed
121802
The IIC write failed
121803
The IIC read failed
121804
There was no response from the analogue board.
121805
No DS error code known for analogue board error:
121806
Reading the slash version failed
121807
Initialisation of IIC or reaching NVRAM failed
121808
Reading an unexpected section version in NVRAM
Example
DS:> 1218
121800: The slash version is: 82
Test OK @
Nucleus Name
DS_SYS_VirginModeOn
Nucleus Number
1220
Description
Turn on the virgin mode functionality (e.g. the auto channel search upon start-
up)
Technical
-
Issue the command to set the bit for the virgin mode to the analogue board
Execution Time
Less than 1 second.
User Input
None
Error
Number
Description
122000
Turning on the virgin mode succeeded
122001
Turning on VirginMode on the Analogue Board failed.
122002
The returned error code from the analogue board is unknown:
122003
No DS error code known for analogue board error:
122004
There was no response from the analogue board.
122005
Section validation or write failed in NVRAM
122006
Reading the CONFIG section from NVRAM failed
122007
Initialisation of IIC or reaching NVRAM failed
Example
DS:> 1220
122000:
Test OK @
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网,免费下载各种维修资料