EN 11
3139 785 32804
4.
Mechanical Instructions
2) Flip the Basic Engine over to remove 4 screws from
the PCB protection plate. Service Position of the Basic
Engine is shown in Figure 6.
Figure 4-6: Basic Engine Service Position
4.4 Dismantling of the PSU Board
1) Remove 3 screws to loosen the PSU Board 1004 as
shown in Figure 7.
Figure 4-7: PSU remove mounting screws
Insulation Sheet
2) Service position for PSU Board is given in Figure 8.
Figure 4-8: PSU Board Service Position
4.5 Dismantling of the HDD
1) Remove 4 screws to loosen the HDD assembly (HDD
1005 and HDD Bracket 186 attached together by the
screws 271, for DVDR3590H there also includes HDD
Damper 191 and HDD Suspension Bracket 192) as
shown in figure 9.
Figure 4-9: Remove mounting screws for HDD
2) Flip over the HDD Assembly to see the mounting screws
271. Remove the screws to dismantle the HDD 1005 from
the HDD assembly.
Notes: Only the special type of screws as described in
Service Parts List must be used for position number 271.
Using improper screws may damage the mounting holes on
the HDD.
.
Insulation Sheet
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网,免费下载各种维修资料