EN 82
3139 785 32804
Firmware Upgrading & Diagnostic Software
5.
Nucleus Name
DS_HDD_Diagnostics
Nucleus Number
2105
Description
Shall perform the internal diagnostic tests implemented by the hard disk drive.
Technical
-
Initialise/start IDE
-
Send the diagnostic (ATA) command to the HDD device
Execution Time
Less than 1 second.
User Input
None
Error
Number
Description
210500
The Diagnostic test on the hard disk drive device succeeded
210501
The initialisation of IDE failed
210501
The hard disk drive failed
210501
The diagnostics ATA command failed
Example
DS:> 2105
210500:
Test OK @
Nucleus Name
DS_HDD_UploadImage
Nucleus Number
2106
Description
Upload raw data from the HDD to a DVD+RW
Technical
-
Initialise/start IDE
-
Check for an ATA device on the IDE interface
-
Check for an ATAPI DVD+RW drive
-
Calibrate the DVD+RW laser
-
Repeat until transfer is completed
-
Read x MB from HDD source sector into SDRAM
-
Write x MB from SDRAM to the destination sector on DVD+RW
-
Read sector 0x34000 on DVD containing the transfer table to use
-
Update the contents of the table and write it back
Execution Time
Depending on the number of sectors to transfer it may take approximately 2 MB
per second.
User Input
The user can enter 3 parameters in the next format:
<COMMAND> <HDD sector> <nr of HDD sectors>
<COMMAND> is one of the next strings:
�
NEW: Create a new transfer image table, <HDD sector> and <nr of
HDD sectors> must be entered.
�
ADD: Add a section to the current transfer table, <HDD sector> and
<nr of HDD sectors> must be entered
�
READ: Read the current transfer image table from the DVD. The tray
of the DVD drive is sent out an the user is asked to insert a DVD+RW
�
VIEW: View the contents of the current transfer table
�
GO: Copy data from the HDD to the DVD+RW according to the
currently entered transfer table
<HDD sector> = the sector on HDD to start reading from
<HDD sectors> = the number of HDD sectors to transfer
Error
Number
Description
210600
Uploading image succeeded
210601
The initialisation of IDE failed
210602
Communication with the hard disk drive failed
210603
Communication with the AV3 failed
210604
No DVD+RW is available
210605
Calibrating DVD+RW failed
210607
Error while reading image data from HDD
210608
Error while writing image to DVD+RW
210609
Unable to update the transfer table on the DVD+RW
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网,免费下载各种维修资料