EN 19
3139 785 32804
5.
Firmware Upgrading & Diagnostic Software
Command overview Digital Board
Below you will find an overview of the nuclei, their numbers,
and their error codes. This overview is preliminary and
subject to modifications.
Codec Host Controller (CHR)
Nucleus Name
DS_CHR_DevTypeGet
Nucleus Number
100
Description
Retrieves the device id, the module ids and revisions of the Codec and returns
them to the stdout port.
Technical
-
Determine the codec id by means of comparing version ids of the modules.
-
Read the module-id register of every module and display it to the user.
Execution Time
Less than 1 second.
User Input
None
Error
Number
Description
10000
Getting the information succeeded
10001
Wrong codec id detected
Example
DS:> 100
010000:
Device ID 7300
Codec ID PNX7350
F-BCU (0x0102) 4.0 INTC (0x011d) 3.0
SIF (0xa04b) 2.0
BOOT (0x010a) 3.1 CONFIG (0x013f) 5.0 RESET (0x0123) 5.0
CLOCK (0x013e) 7.0 DEBUG (0x0116) 0.1 UART0 (0x0107) 1.2
UART1 (0x0107) 1.2
I2C0 (0x0105) 0.1 I2C1 (0x0105) 0.1 GPIO (0x013c) 3.1
SYNC (0x013a) 4.0
OSD (0x0136) 1.0 SPU (0xa00e) 1.1 MIXER (0x0137) 3.0
DENC (0x0138) 5.0 CCIR (0x0139) 2.1 VDEC (0x0133) 1.0
PARSER (0xa00d) 0.0 DV (0xa00c) 0.0
IDE0 (0xa009) 1.2 IDE1 (0xa009) 1.2 SGDX (0xa008) 4.0
BYTE (0xa00b) 1.0 OUTPUT (0xa003) 8.0 ACOMP (0xa000) 8.0
VFE (0xa001) 8.0 VCOMP (0xa002) 8.0 SCR (0xa004) 8.0
SIFF (0xa011) 3.0
PSCAN (0xa05d) 0.1
ADEC (0x0134) 1.1 IR (0x0131) 2.0 AOI (0xa08c) 0.0
PIP (0xa04d) 1.0 AVLINK (0x3601) 2.1 USBLINK(0xa08e) 0.0
MSVD (0xa087) 0.0 FEBCU (0xa05e) 1.0 BM (0xa085) 0.0
BMI (0xa084) 0.0 DISP (0xa04d) 1.0
Test OK @
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网,免费下载各种维修资料