Philadelphia Scientific
®
iBOS
®
Pro 6 Series Installation Manual
Page 25 of 84
5. Installing System Components
5.1 Installing Control Box
5.1.1 Install Mounting Bracket
Secure the Mounting Bracket to the position
desired using one anchor screw. Ensure the
Prongs are pointing up and out.
Level the Mounting Bracket and then secure
the other end in place.
5.1.2 Mounting the Control Box
Simply slide the top support feet of the Control
Box over the prongs of the Mounting Bracket.
This holds the Control Box in place for you to
continue install.
5.1.3 Securing the Control Box to Wall
Level Control Box after mounting
Secure the Control Box to the wall with four
more screws as needed.
5.2 Installing the Battery Backup into the Control Box
5.2.1 UPS in Control Box (Optional)
Connect the leads on the back up battery is
connected inside to enable the battery back-
up.
Connect the Control Box
’s power cord to an
outlet in the ‘Battery Backup’ side of the
Battery Backup.