Philadelphia Scientific
®
iBOS
®
Pro 6 Series Installation Manual
Page 32 of 84
5.4.2 Program Display Settings
Each Scrolling Display must be
programmed to show the correct pool.
If this has been completed by the
factory the Scrolling Displays will have
a label indicating the pool number.
Point the remote control at the sign and
press the ESC key. The words SERIAL
ADDR will appear.
Press the ENT key. The sign’s number
will appear (example: ADDR=1).
At the top of the remote control, press
the PREV or NEXT keys to lower or
raise the number to correspond with
the pool number associated to that
sign.
When the sign’s ADDR number
matches the pool number, press the
ENT key.
Press the ESC key. The words SERIAL
ADDR will appear (if not, continue
pressing the ESC key until SERIAL
ADDR appears).
Press the left arrow key on the remote
control. The word BAUDRATE will
appear.
P
ress the ENT key. The sign’s baud
rate will appear (example: 9600).
If the resulting number is not 9600,
press PREV or NEXT keys to lower or
raise the baud rate to 9600.
Press the ENT key. The sign will exit
its set-up mode automatically within 10
seconds.
Remote for Scrolling Display
