Copyright @ 2015 Phicomm Europe GmbH 2014. Print for private use only.
23
PHONE COMPONENTS
Phone components
1. Headset Socket
2. USB Connector
3. Front Camera Lens
4. Receiver
5. Light Sensor
6. Volume (+)
7. Volume (-)
8. Power Key
9. Menu Key
10. Home Key
11. Back Key
12. Microphone
13. Rear Camera Lens
14. Flash light
15. Speaker
INSTALLING SIM CARD AND SD CARD
Make sure to always turn off the power before installing or
replacing the SIM card and Micro SD card. Also, remove the back
cover before you can install the SIM card, battery and storage card.
REMOVE BATTERY COVER
Copyright @ 2015 Phicomm Europe GmbH 2014. Print for private use only.
24
24
24
1.
Make sure your device is turned off.
2.
Carefully hold the device with the front panel facing down.
3.
Hold the lower half of back cover up with your fingers.
Remove it from the opening.
REINSTALL BACK COVER
1.
First hold the upper half of the back. Fasten and align it on
the device.
2.
Slide the back cover into the slots provided.
SIM CARD
The SIM card includes your phone number, the service
information, the phone book and the message storage.
Install SIM Card
1.
Make sure your device is turned off.
2.
Remove the back cover and battery.
3.
Insert the SIM card into the slot with its gold contacts facing
down and the cut-off corner facing inside.
NOTICE:
The phone is dual card dual-standby
mobile phone; two SIM cards can be installed at the
same time.
The SIM1 slot can support 2G/3G/4G card , while the SIM2 can
only support 2G card.
REMOVE SIM CARD
1.
Make sure your device is turned off.
2.
Remove the back cover and battery if it is installed.
3.
Press and slide the SIM card out to remove it.