Phcbi MPR-S150H Series, Руководство по эксплуатации

Страница: 8 / 68

8
PRECAUTIONS FOR SAFE OPERATION
Ask a qualified contractor to carry out disassembly and disposal of the unit. Leaving the unit in
a location that can be accessed by third parties may result in unexpected accidents (e.g. the unit may
be used for unintended purposes).
Do not leave the plastic bags used for packing in a place where they can be reached by small
children
as this may result in unexpected accidents such as suffocation.
When moving the unit, be sure to take precautions to prevent it from falling over.
Moving the
unit with too much force may cause it to fall over, possibly resulting in injury. A qualified individual
must be assigned to supervise the safe movement and relocation of the unit.
Do not install the unit in a location where corrosive gases such as acids are present. Installing
the unit in a location where corrosive substances are present may cause electric components to
corrode, leading to leakage and/or electric shock due to the deterioration of insulation resulting from
corroded electrical components.
Connect the unit to a power source as indicated on the rating label attached to the unit.
Use of
any other voltage or frequency other than that on the rating label may cause fire or electric shock.
Never damage the chamber wall or pipework in the chamber when removing frost. The
refrigerant is flammable and may cause a fire if it leaks.
Install the unit in a well-ventilated (airy) location to prevent the accumulation of flammable
refrigerant.
The flammable refrigerant may cause fire if it leaks.
Flammable and explosive product. The unit contains flammable refrigerant. When repairing or
recycling, only trained service personnel will repair and follow the procedure below.
 Well ventilate the room to prevent refrigerant accumulation.
 Keep fire away when the refrigerant is contained in the product.

Do not damage or break the pipework.
Stop using the fire, open the windows for ventilation, and leave the unit as it is if the pipework
is damaged or the leakage of flammable refrigerant is noticed. Then contact our sales
representative or agent.
Disconnection or connection of the power supply plug may cause ignition,
explosion, or fire.
Always use the power supply cord that is provided. Other power supply cord may cause electric
shock or fire.
Do not use the provided power supply cord for other equipment. That may cause electric shock
or fire.
WARNING