Phcbi MPR-S150H Series, Руководство по эксплуатации

Страница: 46 / 68

46
SETTING THE SELECTABLE PARAMETERS
Setting the device ID for data acquisition
Set a device ID for data acquisition when using the optional data acquisition system (MTR-5000).
 Setting range of device ID: between 0 and 255
 Initial setting (factory setting): 000
1. On the home screen, press the menu key (MENU/HOME).
►The Menu screen is displayed.
2. By pressing the up or down key, move the cursor to the Alarms &
Controls [Fig. 1] and then press the enter key (ENTER).
►The Alarms & Controls screen is displayed.
3. By pressing the up or down key, move the cursor to the DAQ Setting
[Fig. 2] and then press the enter key (ENTER).
►The DAQ Setting screen is displayed.
4. With the cursor on the DAQ ID [Fig. 3], press the enter key (ENTER).
►The DAQ ID screen is displayed, and the current setting (000) is
displayed [Fig. 4].
5. By pressing the right or left key, select the digit to be changed and
then change the figure by pressing the up or down key.
6. Press the enter key (ENTER).
►The setting is memorized and the screen is changed to the DAQ
Setting screen.
7. Press the menu key (MENU/HOME) to display the home screen.
 The display returns to the home screen automatically when 90
seconds has passed without any key operation.
[Fig. 1]
[Fig. 2]
[Fig. 3]
[Fig. 4]
Menu
Set Temp.
5
o
C
Keypad Lock
Temp. Max / Min
Data Log
Alarms & Controls
Alarms & Controls
1/10 Temp. Display
Alarm Setting
Light Setting
Comp. Delay
DAQ Setting
Date & Time
DAQ Setting
DAQ ID
DAQ Speed
Local / Remote
DAQ ID
000
0 - 255