Phcbi MPR-S150H Series, Руководство по эксплуатации

Страница: 40 / 68

40
SETTING THE SELECTABLE PARAMETERS
Setting the buzzer suspended period
An abnormality is indicated again by the buzzer sounding after a certain period has elapsed (the buzzer
recovery time) if the alarm mode continues even after the buzzer has already been silenced by pressing the
buzzer stop key (BUZZER STOP). Always set the “buzzer suspended period” to avoid incorrect recognition
of alarm mode.
 Setting range of buzzer suspended period: between 0 and 60 minutes in 10-minute intervals
 Initial setting (factory setting): 30 minutes
 The buzzer does not sound again when the setting is 0 (but if the other alarm is occurred, the buzzer
sounds). The setting should be between 10 and 60 to ensure the safety of stored items.
1. On the home screen, press the menu key (MENU/HOME).
►The Menu screen is displayed.
2. By pressing the up or down key, move the cursor to the Alarms &
Controls [Fig. 1] and then press the enter key (ENTER).
►The Alarms & Controls screen is displayed.
3. By pressing the up or down key, move the cursor to the Alarm Setting
[Fig. 2] and then press the enter key (ENTER).
►The Alarm Setting screen is displayed.
4. By pressing the up or down key, move the cursor to the Ring Back
Delay [Fig. 3] and then press the enter key (ENTER).
►The Ring Back Delay screen is displayed, and the current setting (30)
is displayed [Fig. 4].
5.
By pressing the up or down key, change the figure.
6. Press the enter key (ENTER).
►The setting is memorized and the screen is changed to the Alarm
Setting screen.
7. Press the menu key (MENU/HOME) to display the home screen.
 The display returns to the home screen automatically when 90
seconds has passed without any key operation.
[Fig. 1]
[Fig. 2]
[Fig. 3]
[Fig. 4]
Menu
Set Temp.
5
o
C
Keypad Lock
Temp. Max / Min
Data Log
Alarms & Controls
Alarms & Controls
1/10 Temp. Display
Alarm Setting
Light Setting
Comp. Delay
DAQ Setting
Date & Time
Alarm Setting
High Temp.
Low Temp.
Door Alarm Delay
Ring Back Delay
Alarm Volume
Remote ON/OFF
Ring Back Delay
30
min
0min - 60min