Phcbi MPR-S150H Series, Руководство по эксплуатации

Страница: 21 / 68

21
MENU SCREEN
Following shows the screen display and function at each screen under Menu level.
Note: The unit will return from setting mode to the home screen automatically after 90 seconds if no key
is operated (auto-return function). In this case, the setting is not changed.
Screen Function
Reference
page
“Menu” screen
“Set Temp.” screen
Set Temp. Setting the chamber temperature 22
“Keypad Lock” screen
Keypad Lock ON/OFF Setting the keypad lock (ON/OFF) 23 to 24
“Temp. Max/Min” screen
Temp. Max/Min Display of maximum and minimum chamber temperature 25
Max/Min Reset Reset of maximum and minimum chamber temperature 26
Max/Min Interval Setting the interval for maximum/minimum temperature
display 27
“Data Log” screen
Data Log Chart Chart display of chamber temperature or door operation
log 28 to 29
Data Log Export Exporting the chamber temperature and door operation log 30
Data Log Setting Setting the log interval, setting of device ID 31 to 32
Alarm Display of alarm log 33
Alarm Export Exporting the alarm log 34
“Alarms & Controls” screen
1/10 Temp. Display Setting the decimal display of temperature 36
“Alarm Setting” screen
High Temp. Setting the high-temperature alarm 37
Low Temp. Setting the low-temperature alarm 38
Door Alarm Delay Setting the delay of door alarm 39
Ring Back Delay Setting the buzzer suspended period 40
Alarm Volume Setting the buzzer volume 41
Remote ON/OFF Setting the remote alarm 42
“Light Setting” screen
Interior Light Setting the interior light 43
LED Lighting Time Setting the lighting time of the interior light 44
Comp. Delay Setting the compressor delay 45
“DAQ Setting” screen
DAQ ID Setting the device ID for data acquisition 46
DAQ Speed Setting the communication speed for data acquisition 47
Local/Remote Setting the remote control 48
“Date & Time” screen
Date Format Setting the date display (format) 49
Date Setting the date 50
Time Setting the time 51