Phcbi MPR-S150H Series, Руководство по эксплуатации

Страница: 54 / 68

54
ROUTINE MAINTENANCE
Cleaning of exterior, interior, and accessories
Use a dry cloth to wipe off small amounts of dirt on the outside and inside of the unit and all accessories.
If the outside panels are dirty, clean them with a diluted neutral dishwashing detergent.
Wipe off the condensation on the glass or exterior of the cabinet with a dry soft cloth.
 Undiluted detergent can damage the plastic components. For the dilution, refer to the instruction of the
detergent.
 After the cleaning with the diluted detergent, always wipe it off with a wet cloth. Then wipe off the
cabinet or accessories with a dry cloth.
<Important>
Never pour water onto or into the unit. This may cause electric shock or failure.
Do not use a brush, an acid, a thinner, laundry soap, a powder detergent, or boiling water for cleaning.
These may cause damage to painted surfaces or cause perishing of plastic and rubber components.
Moreover, do not wipe plastic and rubber components with a volatile material.
DEFROSTING
The following 2 types of defrosting methods is provided for the refrigerator. Both of them are controlled
automatically.
 Cycle defrosting
The refrigerator temperature is kept stable by ON/OFF operation of the compressor. When the
compressor is OFF (stopped), the frost on the evaporator is melted by the heater. This defrosting never
influences to the refrigerator temperature.
 Defrosting by defrost sensor
The cycle defrosting may not be sufficient to remove the frost on the evaporator when the ambient
temperature is high, the door is opened frequently, or heavy moist items are stored in the refrigerator. In
this case, the defrosting operation is started automatically when the defrost sensor detects the frost.
During the defrosting, DEF is displayed on the temperature display of home screen.
After completion of defrosting, DEF display is disappeared and the refrigerator returns to the normal
operation.
<Important>
During the defrosting, the refrigerator temperature reaches around 10
o
C temporary.
<Reference>
Too much frost is accumulated on the evaporator when the refrigerator is running under high temperature
and humidity condition. For example, the defrosting operation is started once a week when the
refrigerator is running with 2
o C setting at 30 o C, 80 % R.H.