manualshive.com logo in svg

Pfeiffer Vacuum HIQUAD QMG 700, Руководство по эксплуатации

Поделиться
Скачать
Pfeiffer Vacuum HIQUAD QMG 700 Скачать руководство пользователя страница 8

1 About this manual

IMPORTANT

Read carefully before use.
Keep the manual for future consultation.

1.1 Validity

This document describes the function of the products listed in the following and provides the most im-
portant information for safe use. The description is written in accordance with the valid directives. The 
information in this document refers to the current development status of the products. The document 
retains its validity assuming that the customer does not make any changes to the product.

1.1.1 Applicable documents

Designation

Document

"Ion counter pre-amplifier" CP 400 operating instructions

BG 5812

"Input/output module" IO 720 operating instructions

BG 5402

"Analyzer" QMA 4x0 operating instructions

BG 5983

"High-frequency generator" QMH 40x operating instructions

BG 5982

"Quadrupole mass spectrometer" QMG 700 communication instructions BG 5401
QUADERA software documentation

Part of the software

Declaration of conformity

A component of these in-

structions

Tbl. 1:

Applicable documents

You can find these documents in the 

Pfeiffer Vacuum Download Center

.

1.1.2 Variants

This document applies to products with the following article numbers:

Article number

Designation

PT Q11 xxx xxx

QMG 700 HiQuad

PT Q12 xxx xxx
PT Q14 xxx xxx
PT Q15 xxx xxx

Pfeiffer Vacuum reserves the right to make technical changes without prior notification.
The figures in this document are not to scale.
Dimensions are in mm unless stated otherwise.

1.2 Target group

These operating instructions are aimed at all persons performing the following activities on the product:

● Transportation
● Setup (Installation)
● Usage and operation
● Decommissioning
● Maintenance and cleaning
● Storage or disposal

The work described in this document is only permitted to be performed by persons with the appropriate 
technical qualifications (expert personnel) or who have received the relevant training from Pfeiffer Vac-
uum.

About this manual

8/70

Содержание HIQUAD QMG 700







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды