Pfeiffer Vacuum HIQUAD QMG 700, Руководство по эксплуатации

Страница: 14 / 70

► Observe the above shutdown procedures.
► Keep lines and cables away from hot surfaces (> 70 °C).
► Do not carry out your own conversions or modifications on the device.
► Observe the unit protection degree prior to installation or operation in other environments.
► Provide suitable touch protection, if the surface temperature exceeds 70 °C.
► Inform yourself about any contamination before starting work.
2.4 Proper use
The quadrupole mass spectrometer system QMG 700 HiQuad is for gas analysis in the high vacuum
range.
► Install, operate and maintain the product only in accordance with these operating instructions.
► Comply with the limits of use.
► Observe the technical data.
2.5 Foreseeable improper use
Improper use of the product invalidates all warranty and liability claims. Any use that is counter to the
purpose of the product, whether intentional or unintentional, is regarded as improper use; in particular:
● Use outside the limits of use in accordance with the technical data
● Use for measurements whose results determine the safety of persons or large values
● Use with corrosive or explosive media
● Use outdoors
● Use after technical changes (inside or outside on the product)
● Use with replacement or accessory parts that are not suitable or not approved
2.6 Responsibilities and warranty
Pfeiffer Vacuum shall assume no responsibilities and warranty if the operating company or a third party:
● disregards this document
● does not use the product for its intended purpose
● carries out any modifications to the product (conversions, changes, etc.) that are not listed in the
corresponding product documentation
● operates the product with accessories that are not listed in the corresponding product documenta-
tion
The operator is responsible for the process media used.
2.7 Owner requirements
Safety-conscious working
1. Only operate the product in a technically flawless state.
2. Operate the product in line with its intended purpose, safety and hazard-conscious and only in
compliance with these operating instructions.
3. Fulfill the following instructions and monitor the observation of the following instructions:
– Proper use
– Generally applicable safety instructions and accident prevention regulations
– International, national and locally applicable standards and guidelines
– Additional product-related guidelines and regulations
4. Only use original parts or parts approved by Pfeiffer Vacuum.
5. Keep the operating instructions available at the place of installation.
6. Ensure personnel qualification.
2.8 Personnel qualification
The work described in this document may only be carried out by persons who have appropriate profes-
sional qualifications and the necessary experience or who have completed the necessary training as
provided by Pfeiffer Vacuum.
Safety
14/70