manualshive.com logo in svg

Pfeiffer Vacuum HIQUAD QMG 700, Руководство по эксплуатации

Поделиться
Скачать
Pfeiffer Vacuum HIQUAD QMG 700 Скачать руководство пользователя страница 51

9 Maintenance

Maintenance in the Pfeiffer Vacuum Service Center

Pfeiffer Vacuum offers a complete maintenance service for all products.
Pfeiffer Vacuum recommends: Contact your Pfeiffer Vacuum Service Center to arrange the 
maintenance of defective products and components.

Cleaning in the Pfeiffer Vacuum Service Center

Pfeiffer Vacuum recommends: Contact your nearest Pfeiffer Vacuum Service Center to ar-
range the cleaning of heavily-soiled products and components.

Warranty claim

Opening the device during the warranty period or damaging/removing the warranty seal will 
void the warranty.
Contact the Pfeiffer Vacuum Service Center in the event of process-related shorter mainte-
nance intervals.

9.1 Cleaning the control unit and system chassis

 DANGER

Danger to life from electric shock caused by moisture ingress

Water that has entered the unit will result in personal injury through electric shocks.

► Only operate the unit in a dry environment.
► Operate the unit away from fluids and sources of moisture.
► Do not switch on the unit if fluid has entered it. Instead contact Pfeiffer Vacuum Service.
► Always disconnect the power supply before cleaning the unit.

 WARNING

Health hazards due to cleaning agent

The cleaning agent being used causes health hazards which could include, for example, poisoning, 
allergies, skin irritations, chemical burns or damage to the airways.

► When handling cleaning agents, observe the applicable regulations.
► Adhere to safety measures regarding handling and disposal of cleaning agents.
► Be aware of potential reactions with product materials.

NOTICE

Damage caused by penetrating moisture

Penetrating moisture, e.g. through condensation or dripping water, damages the device.

► Protect the device against moisture penetrating.
► Only operate the device in a clean and dry environment.
► Operate the device away from fluids and humidity sources.
► Take special precautions if there is a risk of dripping water.
► Do not switch on the device if fluid has penetrated into it, instead contact the Pfeiffer Vacuum 

Service Center.

NOTICE

Damage caused by unsuitable cleaning agents

Unsuitable cleaning agents damage the product.

► Do not use solvents as they attack the surface.
► Do not use any aggressive or abrasive cleaning agents.

Maintenance

51/70

Содержание HIQUAD QMG 700







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды