manualshive.com logo in svg

Pfeiffer Vacuum HIQUAD QMG 700, Руководство по эксплуатации

Поделиться
Скачать
Pfeiffer Vacuum HIQUAD QMG 700 Скачать руководство пользователя страница 44

5.2.1 Installing system chassis as 19" rack module

Procedure

1. Push the unit into the control cabinet according to DIN 41 494.
2. Fasten the unit using the corresponding screws.
3. Always tighten all screws and strain reliefs to ensure reliable contact making and prevent plugs 

from falling out.

5.2.2 Installing system chassis as tabletop unit

Required tools

● Screwdriver

Required material

● 4 plastic feet

Fig. 42:

Insert plastic feet in the bores

Fig. 43:

Press in locking pins

Procedure

1. Turn over the unit.
2. Insert the plastic feet into the bores provided in the bottom plate.
3. Push the protruding locking pins in the plastic feet all the way in using a screwdriver handle part.
4. Turn over the unit again.

5.3 Installing or replacing plug-in modules in system chassis

NOTICE

Damage to unit from electrostatic discharge

Electrostatic discharge damages electronic components. Defects resulting from failure to comply with 
this warning shall result in loss of any warranty claim entitlement.

► Carry out all work on ESD-protected workstations only, in compliance with the appropriate work-

ing methods.

► When the unit is open, take suitable precautions against electrostatic charges.
► Always store electronic units and components in anti-static packaging.
► Observe EN 61340, Parts 5-1 and 5-2 – Protection of electronic devices from electrostatic phe-

nomena.

Required tools

● Screwdriver "PZ" type, size 1

Installation

44/70

Содержание HIQUAD QMG 700







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды