Pfeiffer Vacuum ATH 1603 M, Руководство по эксплуатации

Страница: 4 / 78

6.2.2 Pumping start-up 39
6.2.3 Restarting the pump after an emergency equipment stop 40
6.3 Shutting down the pump 40
6.3.1 Pumping shutdown 40
6.3.2 Powering off 41
6.3.3 Prolonged stoppage 41
6.4 Operation monitoring 41
7 Advanced settings 43
7.1 Pump temperature management system 43
7.2 Pump braking 43
8 Interfaces for control 44
8.1 Control modes 44
8.2 Control via the HHR 44
8.2.1 Powering on 45
8.2.2 DISPLAY menu 46
8.2.3 SETUP menu 47
8.2.4 SER NUM menu 47
8.3 Control via the REMOTE connector 48
8.3.1 Logic input wiring 48
8.3.2 Logic output wiring 49
8.4 Command via the RS-232/RS-485 serial link 50
8.4.1 Connections 50
8.4.2 Communication protocol 51
8.4.3 Command list 52
8.5 Operation via fieldbus 56
9 Maintenance 57
9.1 Maintenance safety instructions 57
9.2 Maintenance frequency 58
9.3 On-site maintenance 59
9.4 Exchange procedure by a replacement product 59
9.4.1 Disconnecting the pump from the installation 59
9.4.2 Draining the water circuit 60
9.4.3 Preparing the pump for shipping 60
10 Decommissioning 62
10.1 Shutting down for longer periods 62
10.2 Recommissioning 62
10.3 Disposal 62
11 Malfunctions 64
11.1 Malfunction and fault indication 64
11.2 Malfunction 64
12 Service solutions by Pfeiffer Vacuum 67
13 Accessories 69
14 Spare parts 70
15 Technical data and dimensions 71
15.1 General 71
15.2 Technical data 71
15.2.1Environmental characteristics 73
15.2.2Cooling water characteristics 73
15.2.3Nitrogen characteristics 74
15.2.4Electrical characteristics 74
Table of contents
4/78