List of figures
Fig. 1:
Description of an M version ATH 500 pump
Fig. 2:
Description of an MT version ATH 500 pump
Fig. 3:
Example of integrated electronic drive unit
Fig. 4:
Mechanical connection of the pump to the equipment
Fig. 5:
Graph of the loads exerted on the equipment
Fig. 6:
Operating positions
Fig. 7:
Installating the pump horizontally
Fig. 8:
Installing the pump inlet facing up
Fig. 9:
Assembly of the air cooling accessory
Fig. 10:
Purge flow diagram
Fig. 11:
Purge set
Fig. 12:
48 VDC power supply male connector
Fig. 13:
Fan wiring to 48 VDC external power supply (accessory)
Fig. 14:
Typical electrical wiring diagram
Fig. 15:
Pumping installation diagram
Fig. 16:
Remote connector: control by direct voltage
Fig. 17:
Remote connector: control by dry contacts
Fig. 18:
Remote connector: logic outputs
Fig. 19:
ATH 500 M dimensions
Fig. 20:
Air cooled ATH 500 M dimensions
Fig. 21:
ATH 500 MT dimensions
List of figures
7/78
