Pfaff 3307-1 SERIES Скачать руководство пользователя страница 8

Страница: 8 / 132

Safety

.03

Safety symbols

Danger!
Special points to observe.

Danger of injury to operating or technical staff!

Caution

Do not operate without ﬁnger guard and safety de-
vices.
Before threading, changing bobbin and needle, cleaning
etc.

switch off main switch

.04

Important notes for the user

This instruction manual belongs to the equipment of the machine and must be available
to the operating staff at all times.

This instruction manual must be read before the machine is operated for the ﬁrst time.

Both operating and technical staff must be instructed on the safety devices of the mach-
ine and on safe working methods.

It is the duty of the user to operate the machine in perfect running order only.

The user must ensure that none of the safety devices are removed nor put out of work-
ing order.

The user must ensure that only authorized persons operate and work on the machine.

For further information please refer to your PFAFF agency..

●

Содержание 3307-1 SERIES





































































































































Результаты поиска

Содержание 3307-1 SERIES

Отзывы:

Похожие инструкции для 3307-1 SERIES

Бренды по названию

Популярные бренды

Pfaff 3307-1 SERIES, Инструкция по эксплуатации

Результаты поиска

Содержание 3307-1 SERIES

Отзывы:

Похожие инструкции для 3307-1 SERIES

Бренды по названию

Популярные бренды