3
Introduction
The PERMACONN system provides two-way communication between supervised
premises and the monitoring centre. The Permaconn PM1030 is a versatile state of the
art microprocessor based 3G and NextG security communicator. This unit can interface
with a range of alarm panels using RS485 / RS232 and Contact ID. It also has four (4)
Inputs and three (3) Outputs.
The Permaconn PM1030 reports Contact ID events on the 3G networks.
The Permaconn PM1030 polls according to the registered fault recognition time.
Features of the Permaconn PM1030
Four (4) Inputs and a dedicated box tamper
Three (3) Outputs
Contact ID interface (requires DI300 module)
RS485 / RS232 Interface (requires IFM)
IP reporting (requires IP63 Module)
Monitors and reports status of alarm panel interface lead
Monitors and reports battery status
Monitors and reports DC power status
Non volatile memory stores all setup information in the event of a power failure
Dual Sim Cards
No onsite programming required
RF signal strength indicator
Various LED status indicators for easy onsite diagnostics
13.8V battery charging circuit.
RDCCO_2143_E_IN
PM1030 Manual March 2019 v2.2