11
Final Commissioning Check List
‘HEART BEAT’ LED Blinking
‘Online/GPOL’ LED Steady On
‘COMMS LED’ blinking
Signal Strength LED (L/M/H) is M or H
‘BATTERY’ LED is Off
‘POWER’ LED is On
Tamper switch connected
Test 3G communication
Make sure Permaconn PM1030 is connected.
Generate event from alarm panel.
Verify with monitoring centre that correct CID account and
event received.
Test alarm panel PSTN communication
Remove jumper from DI300
Generate event from alarm panel.
Verify with monitoring centre that correct CID account and
event received via PSTN.
Test Permaconn PM1030 communication
Trigger the tamper input on Permaconn PM1030.
Trigger outputs and inputs
Verify with monitoring centre that correct CID account and
event received.
RDCCO_2143_E_IN
PM1030 Manual March 2019 v2.2
