PerkinElmer TGA 8000, Инструкция по установке и эксплуатации оборудования

Страница: 80 / 94

80 . TGA 8000 Installation and Hardware Guide
Accupik Accessory
The TGA 8000 Autosampler Accupik is an accessory designed to help protect the validity of your
aqueous or volatile samples. Samples are sealed in volatile sample pans especially designed to fit
the TGA 8000 crucibles. The crucibles then are positioned in the autosampler tray for the run.
The Accupik is a mechanical device that attaches to the analyzer. From a command in the Pyris
software, it pierces the sealed sample pan just before the crucible in which it resides is loaded
from the autosampler to the hangdown wire and then enters the furnace. The puncturing of the
sample pan provides an additional level of protection against volatilization of samples. Now you
can program volatile sample analysis for unattended overnight runs. The Accupik attaches to the
underside of the balance plate by inserting the standoff in one hole and using a screw in the
other hole to secure it.
Mounting the Accupik
The Accupik attaches to the underside of the balance plate by inserting the standoff in one
hole and using a screw in the other hole to secure it.
To attach the Accupik to the balance plate:
1. Locate the two holes on the underside of the balance plate.
2. Align the round standoff on the Accupik with the rear hole in the balance plate.
3. Using the screw provided, secure the Accupik in place with a screwdriver.