manualshive.com logo in svg

Peri SKYDECK, Инструкция по сборке и эксплуатации

Поделиться
Скачать
Peri SKYDECK Скачать руководство пользователя страница 10

8

SKYDECK Panel Slab Formwork

Instructions for Assembly and Use – Standard Configuration

A1 Storage and transportation

Fig. A1.01

Fig. A1.02

Fig. A1.04

Fig. A1.05

Fig. A1.03

 

– Instructions for Use for PERI Pallet 

and Stacking Devices must be  
followed at all times! 

 

– Manually-created transport units 

must be correctly stacked and  
secured! 

 

– Pallets and stacked components 

are to be protected against the ef-
fects of the weather, e.g. secure 
packed components with tension 
straps against lifting! 

 

– Always attach the 4-sling lifting 

gear using the four load-bearing 
points!

Transport

PERI pallets and stacking devices are 
suitable for lifting by crane or forklift. 
They can also be moved with the PERI 
Pallet Lifting Trolley. All pallets and 
stacking devices can be lifted using 
both the longitudinal and front sides.
The following are some examples.

Stacked with Panels SDP 150 x 75

Pallet SD:  48 pieces
(Fig. A1.01 + A1.02)
Pallet SD:  14 pieces
(Fig. A1.04 + A1.05)
The Pallet SD can also be used for  
storing other SKYDECK components, 
e.g. Main Beam SLT. (Fig. A1.03)

Stacking:

2 loaded pallets, one on top of the other.

Lashing straps are manufactured ac-
cording to DIN EN 12195-2, and are to 
be regularly checked in accordance with 
this standard. 

SKYDEKC AuV_ex_791458.indb   8

13.12.16   16:54

Содержание SKYDECK







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды