Pepperl+Fuchs HD2-DM-A Скачать руководство пользователя страница 31

Страница: 31 / 203

Advanced Diagnostics

Product Description

3.4

KT-MB-GT2AD.FF.IO - Diagnostic Gateway, Kit with I/O Motherboard

General Overview

The FieldConnex

Diagnostic Gateway collects all data from the advanced diagnostic module

(ADM) and provides interfaces to access the data from the diagnostic manager and PCS.

•

Ethernet

Allows access to the ADMs for the diagnostic manager and the FDS/OPC server. It is

mainly used for the FDS/OPC integration, but can also be used with the FOUNDATION

Fieldbus H1 interface to enhance the functionality of the diagnostic manager and to

access the FOUNDATION Fieldbus device locally using a mobile computer.

•

FOUNDATION Fieldbus H1

Provides the core diagnostic data of up to 16 HD2-DM-A ADMs as FOUNDATION Field

bus H1 device. The Ethernet interface can be used in addition to the FF-H1 interface to

enhance the functionality of the diagnostic manager and to access the FOUNDATION

Fieldbus device locally using a mobile computer.

•

Common alarm output

The common alarm output can be used to report the ADM alarms as a volt-free contact to

a PCS input.

The gateway is seamlessly integrated into the FieldConnex

advanced physical layer solution

and provides many features for a fast and easy installation and setup of the advanced diagnos

tics.
Compared to the KT-MB-GT2AD.FF diagnostic gateway the KT-MB-GT2AD.FF.IO uses a differ

ent motherboard with I/O functionality. This includes binary inputs, binary outputs, frequency

inputs, temperature inputs and integrated sensors for temperature and humidity. These inputs

and outputs are primarily designed for cabinet management applications like heater or cooling

control and door open alarms. The cabinet management application is supported by additional

control features like on/off controllers in the diagnostic gateway.

Note

The diagnostic gateway FF-H1 connection must never be connected to device couplers like the

Fuchs Segment Protectors or FieldBarriers.
The diagnostic gateway must be connected directly to the trunk.
For best performance, we recommend using a separate FF-H1 diagnostic segment for

diagnostic gateways. Scheduled FB data must be kept to a minimum for this segment.

Содержание HD2-DM-A












































































































































































































Результаты поиска

Содержание HD2-DM-A

Отзывы:

Похожие инструкции для HD2-DM-A

Бренды по названию

Популярные бренды

Pepperl+Fuchs HD2-DM-A, Руководство пользователя

Результаты поиска

Содержание HD2-DM-A

Отзывы:

Похожие инструкции для HD2-DM-A

Бренды по названию

Популярные бренды