Pepperl+Fuchs HD2-DM-A, Руководство пользователя

Страница: 123 / 203

Advanced Diagnostics
FOUNDATION Fieldbus Integration
2
02
0-
11
123
6.8.6.1 Long-Term History
The long-term History function enables you to collect and store data in well-defined recording
intervals. The minimum and maximum value of each measured value within the recording inter -
val are stored as one data set. Recording intervals can range from 4 hours up to 7 days.
Defining a Recording Interval
In order to define the recording interval for the long-term history, proceed as follows:
1.
Open online parameterization.
2.
Select an ADM transducer block.
3.
Set block mode to "OOS" if required.
4.
Move to the configuration tab and adjust the history period.
5.
Choose Apply to confirm the changes.
6.
Restore the block mode.
6.8.6.2 Export History
The export history function enables you to convert the long-term history data into a commonly
used document format, in order to use this data for your own calculations. The long-term history
can be exported as Microsoft
®
Excel document, comma-separated values (CSV file), or binary
history file (HIS).
Exporting the History
In order to export the long-term history data, proceed as follows:
1.
Select "Segment to Export the History data for".
2.
Select the segment and choose Start .
Note
The data storage is limited to 100 data sets. New data sets will overwrite existing ones, which
means that data set 101 overwrites data set 1.
Depending on the defined recording interval, the long-term history can range from 17 days (4 h
* 100 = 400 h = approx. 17 days) up to approx. 2 years.