Pepperl+Fuchs HD2-DM-A, Руководство пользователя

Страница: 90 / 203

2
02
0-
11
90
Advanced Diagnostics
FDS/OPC Integration
Other Trigger Events
5.12.4 Toolbars and Shortcuts
Recording Toolbar
Maintenance required by address
(available since diagnostic manager version
1.3)
Triggers when one of the parameters noise, jit -
ter or signal level gets into state maintenance
required.
Note: Amplitude, recording length, and pre -
trigger time are set automatically independent
from the settings here.
Out of Specification by address
(available since diagnostic manager version
1.3)
Triggers when one of the parameters noise, jit -
ter or signal level gets into state out of specifi -
cation.
Note: Amplitude, recording length, and pre -
trigger time are set automatically independent
from the settings here.
Name Result
Note
The CRC values of the advanced diagnostic module and the host system can differ, depending
on the fault tolerances.
Name Result
CRC error Trigger if a fieldbus frame with a CRC error is
detected.
Framing error Trigger if a frame is invalid (e. g., SOF
detected but EOF missing).
Signal level Trigger if a voltage higher than the specified
value is detected. Triggers exist for signals,
noise, etc.
Note
If you close the oscilloscope dialog, all unsaved recordings are lost.
Button Name Result
Cancel Recording Cancel the current oscillo -
scope record.
Open Open a saved oscilloscope
record.
Save Save oscilloscope record as
XML-file.
Export as Image Save the current view of the
oscilloscope graph as image.
File types: png, jpeg, gif, bmp
Page Setup The page setup object con -
tains all page setup attributes:
Paper size, left margin, bottom
margin and so on.
Print Print the current view of the
oscilloscope graph.