Pepperl+Fuchs HD2-DM-A, Руководство пользователя

Страница: 159 / 203

2
02
0-
11
158
Advanced Diagnostics
Appendix
HUMIDI -
TY_IN -
PUT_INT
Board humidity value and status
FREQ_IN -
PUT_X (1-
2)
Frequency input X value and status
RELAY_OUT -
PUT_X (1-
2)
Output value and status of relay output:
• 0: Relay is off (open)
• 1: Relay is on (closed)
BUZZER_OUT
PUT
Output value and status of buzzer:
• 0: Buzzer is off
• 1: Buzzer is active
COM -
MON_ALARM_
OUTPUT
Output value and status of common alarm output. This is a fail -
ure output, so “ on ” means “ open ” :
1. 0: Common alarm output is closed
2. 1: Common alarm output is open
ON_OFF_ -
CONT_X (1-
4)
Output value and status of on/off controller
FD_BINA -
RY_OOS_MAP
W, S, OOS When activated, a value of "1" of the corresponding binary
input triggers a field diagnostics IO_TB-Out-of-Specification
condition.
FD_BINA -
RY_MR_MAP
W, S, OOS When activated, a value of "1" of the corresponding binary
input triggers a field diagnostics IO_TB-Maintenance-
Required condition.
BINARY_IN -
PUT_1_SET -
TINGS/
BINARY_IN -
PUT_2_SET -
TINGS
Record, W, S,
OOS
TAG
Tag of the input
OPTIONS
• Enable or disable lead breakage detection
• Enable or disable short circuit detection
• Use input as frequency input instead of binary input
• Invert (binary mode only)
• Use Fault state (binary mode only)
• Fault state to value (binary mode only)
• Fault state (binary mode only)
HI_HI_OOS
Field diagnostics High-Out-of-Specification frequency limit
(frequency mode)
HI_MR
Field diagnostics High-Maintenance-Required frequency limit
(frequency mode)
LO_MR
Field diagnostics Low-Maintenance-Required frequency limit
(frequency mode)
LO_LO_OOS
Field diagnostics Low-Out-of-Specification frequency limit (fre -
quency mode)
HYSTERESIS
Diagnostics hysteresis in order to avoid alarm flickering (fre -
quency mode).
Parameter Char. Description