Penlon Prima 320 Advance Скачать руководство пользователя страница 50

Страница: 50 / 96

Prima 320 Advance

User Manual

Operating the Anaesthesia System

6.2

Display Controls

6.2.1 Standby screen

If the system is not in use, select standby to save power.

The system enters standby status automatically after start-up.

Standby mode features:

1. Displayed monitored parameters and waveforms are

disabled, and ventilation stops.

2. Parameters can be set and the system will operate based

on those settings when standby is exited.

3. Physiological alarms are cleared automatically

4. Technical alarms function normally.

5. The monitor module enters standby status.

6. Service modes are activated.

6.2.2 Working screen

1. Ventilator setting fields:

Parameters related to the selected ventilation mode.

2. Waveforms fields:

Measured value waveforms are displayed.

Waveform content can be set by the user.

3. Ventilation mode display:

For manual ventilation, ‘Manual’ is displayed.

If ‘Ventilator’ is selected by using the bag/vent switch, the

currently selected ventilator mode is displayed.

4. Alarm message field: Active

alarms are displayed.

5. Alarm silence icon:

The icon is displayed if the alarm silence key is pressed.

A 120-seconds countdown is triggered.

NOTE

The O2 Supply Failure alarm is not silenceable.

6. Measured values fields.

Values of standard parameters are displayed.

7. System time fields.

8. Function keys fields:

Modes, Alarm, System, and Monitoring.

9. Power status display fields:

Displays power supply in use.

If the battery is in use, battery charge level is displayed.

10. Trigger Icons fields:

The trigger icon is displayed when the patient’s

spontaneous inspiration reaches the preset Trigger Level.

11. Multiple Alarm Icon:

The icon is displayed if two or more alarms are active. The

highest priority alarm is displayed in the alarm message

field. The number of active alarms is shown.

Содержание Prima 320 Advance

































































































Результаты поиска

Содержание Prima 320 Advance

Отзывы:

Бренды по названию

Популярные бренды

Penlon Prima 320 Advance, Руководство пользователя

Результаты поиска

Содержание Prima 320 Advance

Отзывы:

Бренды по названию

Популярные бренды