Penlon Prima 320 Advance, Руководство пользователя

Страница: 48 / 96

Prima 320 Advance 42 User Manual
2. System Time
a) Select [System] -> [Date & Time].
b) Set [Time] and [Date].
c) Select [Apply].
3. Sigh breath internal
a) Select the [System] -> [Settings] -> [Sigh Breath
Every].
b) In the [Sigh Breath Every] menu, set 50-150 breaths.
4. Language
a) Select [System] -> [Settings] -> [Language].
b) In the [Language] menu, select the required language
5. Oxygen monitoring: On or Off - systems configured with an
oxygen sensor in the absorber
If the O2 sensor is depleted, or not fitted in the absorber,
the oxygen monitor can be set to OFF to prevent the
occurrence of an O2 sensor alarm.
a) Select [System] -> [Settings] -> [O2].
b) Set the oxygen monitor to [ON] or [OFF].
6. CO2 / AA monitoring
If a CO2 / AG module is fitted, set the on/off switch.
a) Select: [System] -> [Settings] -> [CO2] / [AA].
b) Set [ON] or [OFF].
7. SpO2 monitoring
If a SpO2 module is fitted, set the ON/OFF switch.
a) Select [System] -> [Settings] -> [SpO2].
b) Set [ON] or [OFF]
8. Set patient trigger type
In [SIMV-V], [SIMV-P] and [PSV] mode, a patient trigger is
permitted. Trigger sensitivity can be set in flow triggering
(Fsens) or pressure triggering (Psens). Normally, flow
triggering is preferable as this enables the patient to
breathe with less effort.
a) Select [System] -> [Settings] -> [Trigger Type].
b) Select the desired trigger type.
9. Set driver gas type (O2 or Air))
a) Select standby mode.
b) Select [System] -> [Settings] -> [Driver].
c) Select the desired driver gas type: O2 or Air.
d) The drive gas icon (1) is displayed on screen, below the
Alarm message field. ‘X’ will be shown as the drive
gas in use.
Operating the Anaesthesia System
1