BRUSH CUTTER EXCELION 2 LH
53_154421-A
7. Align the angle gear and its cover in order to match
the holes located on each of the elements.
8. Insert the Torx 25 wrench (22) supplied with your tool
into the hole on the angle gear.
This action will make it possible to lock the position
of the angle gear and of its cover.
9. Using the special EXCELION 2 wrench (23) supplied
with your tool, unscrew the nut clockwise while hold-
ing the protective bowl.
10. Remove the protective bowl.
11. Check that the anti-vegetation protection washer
(25) is present on the angle gear (11).
12. Place the following parts in turn on the angle gear:
• the chisel-saw blade (ref. 111700),
Note
Pay attention to the mounting direction. The
direction of the arrow engraved on the blade
must match that of the arrow on the housing.
• the protective bowl.
31
Содержание EXCELION 2 LH
Страница 2: ......
Страница 82: ......
Страница 83: ......
Страница 84: ...PELLENC Quartier Notre Dame 84120 Pertuis France...