PELLA
®
INSYNCTIVE
®
INTEGRATED ENTRY DOOR SENSOR PRODUCT GUIDE
|
7
NOTE:
BRIDGE is in sync mode while the orange light is flashing.
BRIDGE will remain in sync mode for 2 minutes. BRIDGE will then
beep, and orange light will turn off to indicate BRIDGE exited
sync mode.
To sync LOCK SENSOR to BRIDGE, ensure that your entry door is
closed and locked; then unlock and lock your door 2 times within
5 seconds.
Wait for the light on BRIDGE to flash green and beep for 2
seconds. This will indicate a successful sync.
If LOCK SENSOR sync is unsuccessful, return to Step 2 and retry
the process.
Repeat the previous steps until all INTEGRATED ENTRY DOOR
SENSORS have been synced to BRIDGE.
To exit sync mode, press and hold Sync button on BRIDGE until
light stops flashing orange.
WITH HOME AUTOMATION
BRIDGE supports two types of home automation systems,
Professionally Installed and Do-It-Yourself (DIY) Z-Wave. For a list
of compatible home automation systems or syncing instructions,
visit
Insynctive.Pella.com.
DETAILED INSTRUCTIONS
(continued)
LIGHT
SYNC
BUTTON
TEST
BUTTON
BRIDGE
UNLOCKED
LOCKED
