manualshive.com logo in svg

Pella Insynctive, Руководство по эксплуатации продукта

Поделиться
Скачать
Pella Insynctive Скачать руководство пользователя страница 3

PELLA

®

 INSYNCTIVE

®

 INTEGRATED ENTRY DOOR SENSOR PRODUCT GUIDE

  | 

 3

REGISTERING PRODUCTS

Visit 

Insynctive.Pella.com/Registration

 to register your new Pella

®

 Insynctive

®

 products. 

NEED HELP?

For instant access to warranties, troubleshooting information and videos, visit  

Insynctive.Pella.com/Support

 or call 

855-473-5524

.

HAVE A HOME AUTOMATION SYSTEM?

To view a list of compatible systems and find instructions on how to sync Pella Insynctive products, 
visit 

Insynctive.Pella.com

.

WARNING

Failure to adhere to the warnings below may result in death, serious injury and/or loss of valuables.

•  Pella Insynctive INTEGRATED ENTRY DOOR SENSORS are not 100% reliable for a variety of 

reasons. For example, SENSORS:

  —  communicate data wirelessly, and wireless data is susceptible to interference or failure.
  —  require proper installation.
  —  require a battery with an adequate charge.
  —  may indicate a locked status when a door is not completely closed.
  —  may be damaged after installation.

Therefore, Pella Insynctive products should not be relied upon in situations where life, safety and/or 
protection of valuables are solely dependent on their function. Test each product at least once per 
year to help ensure proper operation.

•  Pella Insynctive products are not a substitute for careful adult supervision of children.
•  Keep battery and other small parts out of the reach of children. If small parts are swallowed, 

immediately seek medical help.

•  Batteries carry the risk of fire, explosion and burns. Do not recharge, disassemble or incinerate.
•  INTEGRATED ENTRY DOOR SENSORS may indicate an entry door is closed but water intrusion may 

occur during rain. Entry doors should be closed and locked for optimal performance in rain.

GENER AL AND SAFET Y INFORMATION

Содержание Insynctive






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды