Pella Insynctive Скачать руководство пользователя страница 4

Страница: 4 / 21

PELLA

INSYNCTIVE

INTEGRATED ENTRY DOOR SENSOR PRODUCT GUIDE

SPECIFICATIONS

Frequency:

433.92MHz (Insynctive)

Operating Temperature:

-22° to 140°F (-30° to 60°C)

Operating Humidity:

5% to 95% RH noncondensing

Lock Sensor Battery:

3V lithium CR2032

Open/Close Sensor Battery:

3V lithium CR2

Typical Battery Life:

10 years (based on operating temperatures of

32° to 120°F [0°to 49°C], may vary by use)

Magnet Gap:

1/4" max between door panel and lock jamb

INTEGRATED ENTRY DOOR SENSORS wirelessly communicate the locked or unlocked and
opened or closed status of Entry Doors by Pella to Insynctive

BRIDGE.

Information is wirelessly relayed from BRIDGE to STATUS INDICATOR or a compatible
home automation system,* where locked or unlocked and opened or closed status can be
monitored.

Sensors are integrated into Entry Doors by Pella ordered with Insynctive technology, making
them virtually unnoticeable.

For a list of compatible home autommation systems, visit Insynctive.Pella.com.

PRODUCT OVERVIEW

DOOR JAMB

LOCK

SENSOR

DEADBOLT

STRIKE PLATE

DOOR PANEL

OPEN/CLOSE

SENSOR

DEADBOLT

DOOR PANEL

LOCK

SENSOR

OPEN/CLOSE

SENSOR

INTEGRATED SENSORS FOR ENTRY DOOR

WITH DEADBOLT LOCK

INTEGRATED SENSORS FOR ENTRY DOOR

WITH MULTIPOINT LOCK

Содержание Insynctive






















Результаты поиска

Содержание Insynctive

Отзывы:

Бренды по названию

Популярные бренды

Pella Insynctive, Руководство по эксплуатации продукта

Результаты поиска

Содержание Insynctive

Отзывы:

Бренды по названию

Популярные бренды