PELLA
®
INSYNCTIVE
®
INTEGRATED ENTRY DOOR SENSOR PRODUCT GUIDE
|
11
WITHOUT HOME AUTOMATION (Stand-Alone Mode)
Press and hold BRIDGE Sync button until light begins flashing
orange. The Sync button is the bottom button located on the
side of BRIDGE.
NOTE:
BRIDGE is in sync mode while the orange light is
flashing. BRIDGE will remain in sync mode for 2 minutes.
BRIDGE will then beep, and orange light will turn off to indicate
BRIDGE exited sync mode.
To sync LOCK SENSOR to BRIDGE, unlock then lock your entry
door 2 times within 10 seconds.
Wait for the light on BRIDGE to flash green and beep for
2 seconds. This will indicate a successful sync.
If LOCK SENSOR sync is unsuccessful, unlock then lock your
entry door 2 more times within 10 seconds. Then wait until
BRIDGE indicates a successful sync.
Repeat the previous steps until all INTEGRATED ENTRY DOOR
SENSORS have been synced to BRIDGE.
To exit sync mode, press and hold Sync button on BRIDGE until
light stops flashing orange.
DETAILED INSTRUCTIONS
(continued)
LIGHT
SYNC
BUTTON
TEST
BUTTON
BRIDGE
UNLOCKED
LOCKED
