Pelgrim OVS614MAT, Инструкция по эксплуатации

Страница: 82 / 88

EN 40
Removal and reinsertion of the oven door
1. Open the door completely to the horizontal position.
2. Slightly pull up the locking pins on both sides (A) and then tilt them
all the way forward (B).
3. Now slowly close the door until you feel a slight resistance.
4. Then lift it upwards and pull it out.
To reinsert the door repeat the procedure backwards. If you have
trouble closing or opening the door, check if the hinge grooves are
properly inserted into their slots.
B
A
Always make sure the lock latches are correctly positioned in their
slots. Never let the hinge locks spring out, as the central springs
are very strong and may cause injuries.
Removal and reinsertion of oven door glass
Oven door glass may be cleaned from the inside, but you will have
to remove the glass from the door. First remove the oven door (see
chapter ‘Removal and Reinsertion of Oven Door’).
1. Slightly lift the brackets on the left and the right side of the door
(mark 1 on the bracket) and pull them slightly away from the glass
(mark 2 on the bracket).
2. Grab the door glass at the bottom edge and lift it slightly upwards
to remove it from the support.
3. The inner third glass (depending on the model) is removed by lifting
it slightly and pulling it out. Remove also the rubber seal around the
glass.
CLEANING