Pelgrim OVS614MAT, Инструкция по эксплуатации

Страница: 54 / 88

EN 12
Setting the water hardness
1. Turn the ‘Multi-function Selector’ to select ‘Settings’.
2. Confirm by pressing the ‘Multi-function selector’.
3. Select ‘Other settings’.
4. Confirm by pressing the ‘Multi-function selector’.
5. Turn the ‘Multi-function selector’ to select ‘Water hardness’.
6. Confirm by pressing the ‘Multi-function selector’.
7. Activate the current setting by pressing the ‘Multi-function selector’
and turn the ‘Multi-function selector’ to choose the desired water
hardness (see table).
8. Confirm by pressing the ‘Multi-function selector’.
9. Finally, activate the ‘check mark’ to confirm the new setting.
▷ The appliance is now programmed to provide the descaling
warning when necessary, based on the actual hardness of the
water.
Display
Test strip
number/color
of stripes
Type PPM
French deg.
(°df)
German deg.
(°dH)
1 4 green stripes Very soft water 0 - 90 0 - 9 0 - 5
2 1 red stripe Soft water 90 - 178 9 - 18 5 - 10
3 2 red stripes Medium hard water 178 - 267 18 - 26 10 - 15
4 3 red stripes Hard water 267 - 356 26 - 35 15 - 20
5 4 red stripes Very hard water
>356 >35
> 20
FIRST USE