PELA 498192, Руководство пользователя

Страница: 26 / 46

7. Lift the balancing unit on the shelf.
8. Screw it on by opening the 4 small black doors.
Tighten with the supplied bolt and nut.
9. Install the brake lever.
Install the tire balancing machine
1. The balance must be installed on a fixed
platform that is more than 60 cm high and fixed
with 3 M8 screws.
2. There should be 500 mm around for the
balancing to work correctly.
Fit the screw rod
Mount the balance shaft on the main shaft with
M10 × 150 Allen bolt and then fasten the bolt. (See
Fig. 4-1). Use a striking nutrunner. If the balance
axis is loose, there will be different measurement
results.
Part 1 - Balancer
Specifications
Max wheel weight ............................................ 65 kg
Power supply ............................................ DC12V 1A
Rotating speed ........................... approx. 120r / min
Rim diameter ............. 10 ́ ~ 24 ́ (256mm ~ 610mm)
Rim width .................... 1.5 ́ ~ 20 (40mm ~ 510mm)
Noise................................................................. <70dB
Net weight ......................................................... 30 kg
Features
• 6 LED display, it has flexible interface function
• Energy saving, engine free, hand spin
• Self-calibration
• Automatic self-fault diagnosis and protection
function
• Applies to various rims of steel construction
and aluminum alloy structure
About the machine
The machine consists of a mechanical section and
electrical system:
• The mechanical consists of support bracket
and rotating main shaft; They are fixed to the
frame.
• Electrical system; The microcomputer system
consists of LSI, new high-speed micro-CPU,