PELA 498192, Руководство пользователя

Страница: 25 / 46

• Proper lighting.
• Do not set up the machine where there is
extreme temperature or humidity.
• Protected from weather and wind.
• Room with clean air.
• Lower noise level than current regulations
prescribe.
• Explosive, corrosive and / or toxic materials
must not be stored in the same room.
• From its location, the user must be able to see
the entire machine and the surrounding area.
No outside person may be on this surface and
no objects that may pose a risk may be there.
• Service and repair of the machine must be
performed by a qualified service workshop.
• Any electrical installation must be performed by
a qualified electrician.
Safety
No modification or tampering with the machine
may take place unless approved by the
manufacturer. The manufacturer disclaims all
responsibility for any damage and accidents that
may occur due to such changes or manipulations.
It is strictly forbidden to remove or change the
machine’s safety devices. If this still happens,
serious injury or accident can occur.
Service, repair and spare parts
All maintenance and repairs must be carried out
by a qualified service workshop. Always unplug
the machine before performing any maintenance
or service. Only original parts may be used for any
repairs.
Storage
If the machine is to be stored unused for a long
time, disconnect it from the electrical outlet, make
sure that parts that can be damaged by dirt are
properly protected, and lubricate parts that can be
damaged if they dry.
Installation
Open the package and check for damaged parts. If
there are any problems, do not use equipment and
the contact supplier.
1. Fit the supplied holder to the reduction valve.
2. Unscrew the nut on the reduction valve.
3. Move the reduction valve down to the holder
and screw it on.
4. Mount the shelf with the supplied bolt and nut.
Open the side cover of the tire machine to be
able to hold the nuts in place.
5. Attach the support leg.
6. Screw the three holders to the balancing cones.