Pearl Red Box RBM 20, Руководство пользователя

Страница: 32 / 44

3. Press OUT (F4) to access the click output settings.
4. Use
DEC- / INC+
or the
VALUE / TEMPO DIAL
to adjust the settings:
• OutAssign: This setting lets you assign the output through which the click sound will be sent. When set to
“
MAIN
,” the click will be sent out both channels of the
MAIN OUT
. When set to “
AUX
,” the click will be sent out
both channels of the AUX OUT. You can also select “AUX L” or “AUX R,” which lets you send it out only
one of the AUX OUT channels.
Note: If the “Output” setting on the main UTILITIES Menu is set to “ MAIN>AUX, ” this means the signal sent out the
MAIN OUT
will also be sent out the
AUX OUT
. In this case, the “OutAssign” settings for the
AUX OUT
will display
“(N/A)” next to it, indicating the click will not be heard over this channel. (To make the AUX OUT available for the
click sound, change the “Output” setting on the main
UTILITIES
Menu to “
MAIN&AUX
.”
MIDI (F2)
Pressing
MIDI (F2)
from the Main
UTILITIES
menu lets you access pages that
contain the module’s MIDI settings.
INPT (F1)
This page controls the module’s MIDI input settings.
1. Press
UTILITIES to enter the main UTILITIES Menu.
2. Press MIDI (F2) to access the MIDI settings. The first page to
appear will be
INPT (F1
).
3. Use CURSOR UP / DOWN to move through the menu items
and
DEC- / INC+
or the
VALUE / TEMPO DIAL
to adjust the settings:
• Drum Chan: The MIDI channel number over which the drum sounds will be received ( 01-16 or “OMNI, ” which
sends it over all 16 channels) when played by an external MIDI device.
• Acc Chan: The MIDI channel number over which the Accompaniment will be received (01-16 or “OMNI,” which
sends it over all 16 channels) when played by an external MIDI device.
• LocalCont:
This “Local Control” setting determines whether the module receives MIDI messages from the
triggers or an external source. When set to “ON” (the default), the module’s sounds will receive MIDI messages
from your connected triggers. Switch this setting to “OFF” when you are using an external
MIDI
sequencer. (When
using an external sequencer, if this setting is “ON,” each note will be triggered twice – once in the module and
once via the external sequencer.
Turning Local Control
“
OFF
” ensures you will hear the triggered note only once.)
EXT (F2)
This page’s settings determine how the module responds to external
MIDI controllers.
1. Press
UTILITIES
to enter the main
UTILITIES
Menu.
2. Press MIDI (F2) to access the MIDI settings.
3. Press EXT (F2) to access the external MIDI settings.
4. Use
CURSOR UP / DOWN
to move through the menu items
and DEC- / INC+ or the VALUE / TEMPO DIAL to adjust the settings:
• Prog Chng:
Determines if the module will recognize Program Change
messages from external MIDI sources. When set to “ OFF ” (the default),
the module will ignore Program Change messages. When set to “
RECEIVE
,”
Kits can be selected via Program Change messages from external sources.
•
Clock In: Determines if the module will sync to an external MIDI clock. When set to “OFF” (the
default), the module will run off its internal clock. When set to “
RECEIVE
,” the module’s clock will
sync to the “master” clock of a connected external MIDI source.
OUT (F3)
This page controls the module’s MIDI output settings.
1. Press
UTILITIES to enter the main UTILITIES Menu.
2. Press MIDI (F2) to access the MIDI settings.
3. Press
OUT (F3)
to access the MIDI output settings.
4. Use CURSOR UP / DOWN to move through the menu items and
DEC- / INC+ or the VALUE / TEMPO DIAL
to adjust the settings:
30