Pavone Sistemi JBX8 LCD Скачать руководство пользователя страница 10

Страница: 10 / 53

PROGRAMMING MENU

To access the programming menu, press and hold the long PRG key in the weight display

screen.

ACCESS TO THE MENU WITH METRIC OPERATION (Jumper enabled)
The programming of the weighing parameters and the weight calibration settings are allowed

only to personnel authorized by current legislation, through password protected access or by

activating the calibration DIP switch (CAL). In the case of a calibration DIP switch set to ON,

the access password is not required (procedure described below).

This procedure requires the password table.

To access the menu, the operator identification code is required. The timed

message “ID” is displayed and then the code is entered, so enter the

identification code of the authorized access operator, corresponding with the

password table number and confirm with ENTER. If the value 0000 is confirmed,

access to the menu parameters will be limited (it will not be possible to access

the programming of the weighing parameters and the weight calibration

settings).
A randomly determined 3-digit number appears on the display. Find the

corresponding password (4-digit) on the table
Enter the password obtained from the table and confirm with the ENTER key. If

the value 0000 is confirmed, access to the menu parameters will be limited (it

will not be possible to access the programming of the weighing parameters and

the weight calibration settings).

Each access of authorized personnel is recorded in the searchable memory of

the last 5 accesses.

In case of non-metric use, the jumper must be set in CALIBRATION position; in

this way, the access to the menu is free (without password request).

: 001

Cod

: 123

: 1234

Содержание JBX8 LCD






















































Результаты поиска

Содержание JBX8 LCD

Отзывы:

Бренды по названию

Популярные бренды

Pavone Sistemi JBX8 LCD, Техническое руководство

Результаты поиска

Содержание JBX8 LCD

Отзывы:

Бренды по названию

Популярные бренды