Patton electronics NetLink 2960 RAS, Руководство по началу работы

Страница: 63 / 69

Maintenance 63
Model 2960/2996 RAS Getting Started Guide 5 • Troubleshooting and maintenance
3. Set up HyperTerminal™ as follows:
– Open a HyperTerminal session.
– Enter a name for this connection.
– Click on the Connect using: pop-up menu and choose the Direct to Com X option (where X is the number
of the COM port onto which you connected the cable in step 1) (see figure 40 ).
Figure 40. HyperTerminal properties
– Configure the COM port settings as shown in figure 41 .
Figure 41. COM properties