3 • Configuring the RAS for operation
Model 2960/2996 RAS Getting Started Guide
48
Saving your configuration
– For T1 lines with ESF/B8ZS this should be set to linkYellowFormatDL(2).
7.
Click on
Submit Query
.
Channel assignment
This section describes configuring the RAS so it will know which channels are active. Do the following:
1.
Select
T1/E1 Link
on the
Configuration Menu
. The T1/E1 Link Activity window appears (see
figure 28
on
page 42).
2.
Click on
Channel Assignment
. The WAN Circuit Channel Assignment window appears (see
figure 33
on
page 46).
3.
Click on the
Dialin
button under the
Set all channels to:
section. Channels 25 through 30 are ignored for
T1/PRI lines.
4.
Click on
Submit Query
.
Saving your configuration
The basic configuration for the RAS is now finished. Do the following to save your configuration settings:
1.
Select
Home
on the
Configuration Menu
. The Home window appears (see
figure 18
on page 34).
2.
Click on the
Record Current Con
fi
guration
button (see
figure 20
on page 36).
Note
Failing to click on the
Record Current Con
fi
guration
button before
you power down or reset the RAS will cause your changes to be lost.
3.
The Import/Export function enables you to make a backup (or
export
) copy of your access server’s configu-
ration parameters. By exporting the configurations, the saved files can quickly be loaded (or
imported
) into
a replacement access server—greatly speeding up the installation process should an access server need
replacing.
Note
All actions for Import/Export require superuser access privileges.
Содержание NetLink 2960 RAS
Страница 6: ...Contents Model 2960 2996 RAS Getting Started Guide 6...
Страница 12: ...About this guide Model 2960 2996 RAS Getting Started Guide 12...
Страница 28: ...2 Hardware installation Model 2960 2996 RAS Getting Started Guide 28 Completing the hardware installation...
Страница 52: ...3 Configuring the RAS for operation Model 2960 2996 RAS Getting Started Guide 52 Completing the installation...