Configuring Alarm Indications
97
FS6300 NMS Administrator’s Reference Guide
6 • Managing Alarms and Network Events
3.
Click on
Modify Parameters
to configure the alarms.
Figure 83. Modify Alarm Details
Modify Parameters
: Configure the FS6300 Alarm Parameters through the Modify Parameters window.
– Alarm Syslog Priority
– Board Temperature Threshold
– Current Board Temperature
– Alarm Trap Managers 1-4
4.
Click
Modify
to save your configuration in the card’s volatile memory.
5.
Return to the
Alarm Systems Overview
screen. Before the most severe active alarm is propagated to the
icons in the NMS, you must first do Steps 6-7.
6.
Click on the
Clear All Alarms
button. You should receive a “Configuration Result” window indicating
success.
7.
Click on the
Refresh
button.
8.
Close the Alarm Details window.
9.
Repeat Steps 2-8 for each card in the chassis. After this is completed, return to the view of the chassis in the
main NMS window.